Features: Stainless Steel Wall Mount Panel Design Six Independent Solution Applications Six Independent Air Assist Regulators Quick Connect Injector Design Quick Connect Pump Inlet w/Strainer Remote Pre-Wired MCC Panel Remote Pre-Wired SCC Panel Swivel Wall Mount Bracket Lighted DIN Connectors Pre-Wired DIN Cables M12 Connectors M12 Junction Block System Enable/Disable Button

Specifications: 20 GPM, 3HP Booster Pump 230V/3PH/60Hz/8.9A 460V/3PH/60Hz/4.3A Recommended for use with 30A Breaker Requirements: 1-Pump Wall Mount 12” x 24”x 48” (D x W x L) 2-Pump Wall Mount 12” x 24” x 48” (D x W x L) Hydro-Mix Panel 18” x 38” x 24” (D x W x L) SCC Panel 7” x 12” x 14” (D x W x L) MCC Panel 7” x 12” x 14” (D x W x L) Water Inlet: 1” ID Water Line Supply (20 GPM, 3HP Booster Pump) Per Pump Air Inlet: ½” OD Polyflow 15 CFM @ 80-120 PSI Per HM Panel Solution Outlet Lines: ½” ID Polyflow or Hose up to 4.5 GPM ¾” ID Polyflow or Hose above 5.0 GPM Max Water Source Temp: Recommended up to 110 F Max Water Temp 130 F Operating Water Pressure: Factory Set 200 PSI Assumes 45 PSI City Feed Water Filtration: 50 Micron Control: Pre-Wired Terminal Strip Relay Control 120vac Option 24vac Option

Options: Configure Rocket Injectors from .057 to 11 GPM Optional Tri-Foam Manifold Optional Duo-Foam Manifold Hi-Flow Injector Configuration Stainless Steel Freestanding Frame Stainless Steel Tool Tray Air Gun Spare Parts Kit Install Kit

HYDRO-MIX

CHEMICAL DISPENSING WITH 6 INDEPENDENT FOAMING APPLICATIONS

Hydro-Spray's chemical dispensing system known as "Hydro-Mix" is used in conveyorized tunnel car washes and in-bay automatic applications. Get consistent and precise chemical dispensing with our exclusive Hydro-Mix system. Improve your vehicle coverage and lower your operating costs by reducing expensive chemical waste with every wash.

Hydro-Spray car wash spraying water icon

HYDRO-MIX®

CHEMICAL DISPENSING SYSTEM

Get an impressive chemical management and dispensing system designed to help run your chemicals and water more efficiently. Hydro-Mix meets the demand of high-volume tunnel wash applications with a very efficient chemical dispensing system helping you save money on your chemical applications. Get air actuated water valves that reduce chemical waste, increase performance and double your cleaning power.

Designed for in-bay automatic and tunnel/conveyor systems, the Hydro-Mix Chemical Dispensing System delivers precisely diluted chemistry to multiple applications simultaneously. Customizable to supply all applications in your car wash from .25GPM up to high-volume foam curtain applications. With a stainless steel, rugged design, it's built to meet the rigorous demands of high-volume sites. Hydro-Mix® is tested for reliable operations up to 100,000 wash cycles.

FEATURES

Features:
Stainless Steel Wall Mount Panel Design
Six Independent Solution Applications
Six Independent Air Assist Regulators
Quick Connect Injector Design
Quick Connect Pump Inlet w/Strainer
Remote Pre-Wired MCC Panel
Remote Pre-Wired SCC Panel
Swivel Wall Mount Bracket
Lighted DIN Connectors
Pre-Wired DIN Cables
M12 Connectors
M12 Junction Block
System Enable/Disable Button
SPECIFICATIONS

Specifications:
20 GPM, 3HP Booster Pump
230V/3PH/60Hz/8.9A
460V/3PH/60Hz/4.3A
Recommended for use with 30A Breaker
Requirements:
1-Pump Wall Mount 12” x 24”x 48” (D x W x L)
2-Pump Wall Mount 12” x 24” x 48” (D x W x L)
Hydro-Mix Panel 18” x 38” x 24” (D x W x L)
SCC Panel 7” x 12” x 14” (D x W x L)
MCC Panel 7” x 12” x 14” (D x W x L)
Water Inlet:
1” ID Water Line Supply (20 GPM, 3HP Booster Pump)
Per Pump
Air Inlet:
½” OD Polyflow
15 CFM @ 80-120 PSI
Per HM Panel
Solution Outlet Lines:
½” ID Polyflow or Hose up to 4.5 GPM
¾” ID Polyflow or Hose above 5.0 GPM
Max Water Source Temp:
Recommended up to 110 F
Max Water Temp 130 F
Operating Water Pressure:
Factory Set 200 PSI
Assumes 45 PSI City Feed
Water Filtration:
50 Micron
Control:
Pre-Wired Terminal Strip
Relay Control
120vac Option
24vac Option
OPTIONS

Options:
Configure Rocket Injectors from .057 to 11 GPM
Optional Tri-Foam Manifold
Optional Duo-Foam Manifold
Hi-Flow Injector Configuration
Stainless Steel Freestanding Frame
Stainless Steel Tool Tray
Air Gun
Spare Parts Kit
Install Kit